3com MSR 20-20 참조 매뉴얼

C

HAPTER

 96: MPLS TE C

ONFIGURATION

 C

OMMANDS

display mpls static-cr-lsp [ lsp-name lsp-name ] [ { exclude | include } ip-address 
prefix-length ] [ verbose ]

Any view

lsp-name lsp-name: Label switched path name comprising 1 to 15 characters.

exclude: Displays only CR-LSPs with destination IP addresses other than the one 
specified by the ip-address prefix-length arguments.

include: Displays only CR-LSPs with the destination IP address specified by the 
ip-address prefix-length arguments.

ip-address: Destination IP address.

prefix-length: IP address prefix length, in the range 0 to 32.

verbose: Displays detailed information.

Use the display mpls static-cr-lsp command to display information about static 
CR-LSPs.

# Display brief information about all static CR-LSPs.

<Sysname> display mpls static-cr-lsp

total statics-cr-lsp : 1

RecAckCounter 

Number of received Ack messages 

SendPathErrCounter 

Number of transmitted PathErr messages 

RecPathErrCounter 

Number of received PathErr messages 

SendResvErrCounter Number 

of transmitted ResvErr messages 

RecResvErrCounter 

Number of received ResvErr messages 

SendPathTearCounter 

Number of transmitted PathTear messages 

RecPathTearCounter Number 

of received PathTear messages 

SendResvTearCounter 

Number of transmitted ResvTear messages 

RecResvTearCounter 

Number of received ResvTear messages 

SendSrefreshCounter Number 

of 

transmitted Srefresh messages 

RecSrefreshCounter Number 

of 

received Srefresh messages 

SendAckMsgCounter Number 

of 

transmitted AckMsg messages 

RecAckMsgCounter Number 

of 

received AckMsg messages 

SendErrMsgCounter 

Number of transmitted errors 

RecErrMsgCounter 

Number of received errors 

RecReqFaultCounter Number of request failures

Table 403   Description on the fields of the display mpls rsvp-te statistics command