3com MSR 20-20 참조 매뉴얼

C

HAPTER

 96: MPLS TE C

ONFIGURATION

 C

OMMANDS

12

1

4

0

0

13

1

5

0

0

14

1

6

0

0

15

1

7

0

0 

display mpls te tunnel [ destination dest-addr ] [ lsp-id lsr-id lsp-id ] [ lsr-role { all | 
egress | ingress | remote | transit } ]  [ name name ] [ { incoming-interface | 
outgoing-interface | interface } interface-type interface-number ] [ verbose ]

Any view

destination address: Specifies a destination IP address to display only the tunnels 
with the specified destination IP address.

lsr-id: LSR ID of the ingress node, in dotted decimal notation.

lsp-id: LSP ID, in the range 1 to 65535.

lsr-role: Displays tunnels by LSR role (ingress, transit, egress, or remote).

all: Displays all tunnels.

ingress: Displays tunnels created taking current device as the ingress.

transit: Displays tunnels created taking current device as a transit node.

egress: Displays tunnels created taking current device as the egress.

name name: Displays the tunnel with a particular name. This could be a string of 
1 to 63 characters configured as interface description or the interface name if no 
interface description is configured. The tunnel name should be signaled to all 
hops.

Table 412   Description on the fields of the command

Link ID 

Link ID 

Physical Bandwidth Type0 

CT0 physical bandwidth 

Physical Bandwidth Type1 

CT1 physical bandwidth 

Reservable Bandwidth Type0 

CT0 reservable bandwidth 

Reservable Bandwidth Type1 

CT1 reservable bandwidth 

Downstream LSP Count 

Number of downstream LSPs 

UpStream LSP Count 

Number of upstream LSPs 

IPUpdown Link Status 

IP layer link status 

PhysicalUpdown Link Status 

Physical layer link status 

TE CLASS 

TE class 

CLASS TYPE 

Service class type 

PRIORITY Priority 

BW RESERVED 

Reserved bandwidth