3com MSR 20-20 참조 매뉴얼

C

HAPTER

 96: MPLS TE C

ONFIGURATION

 C

OMMANDS

Use the enable traffic-adjustment advertise command to enable forwarding 
adjacency.

Use the undo enable traffic-adjustment advertise command to disable 
forwarding adjacency.

By default, forwarding adjacency is disabled.

Forwarding adjacency allows OSPF to include static LSP tunnels in SPF calculation 
but not advertise them to OSPF neighbors.

# Enable forwarding adjacency when the IGP protocol is OSPF.

<Sysname> system-view

[Sysname] ospf 100

[Sysname-ospf-100] enable traffic-adjustment advertise 

# Enable forwarding adjacency when the IGP protocol is IS-IS.

<Sysname> system-view

[Sysname] isis 1

[Sysname-isis-1] enable traffic-adjustment advertise 

explicit-path pathname [ disable | enable ]

undo explicit-path pathname

System view

pathname: Name of an explicit path for a tunnel, a string of 1 to 31 characters.

disable: Disables explicit routing.

enable: Enables explicit routing.

Use the explicit-path command to create an explicit path and enter its view.

Use the undo explicit-path command to remove an explicit path.

# Create an explicit path named path1 and enter its view.

<Sysname> system-view

[Sysname] explicit-path path1

[Sysname-explicit-path-path1] 

list hop [ ip-address ]