3com MSR 20-20 참조 매뉴얼

C

HAPTER

 96: MPLS TE C

ONFIGURATION

 C

OMMANDS

Before you can configure this command, enable RSVP-TE.

mpls rsvp-te timer hello.

# Set the maximum number of consecutive hello losses before an RSVP neighbor is 
considered dead to five.

<Sysname> system-view

[Sysname] mpls

[Sysname-mpls] mpls rsvp-te hello-lost 5 

mpls rsvp-te keep-multiplier number

MPLS view

number: Keep multiplier, in the range 3 to 255.

Use the mpls rsvp-te keep-multiplier command to configure the keep 
multiplier for the path state block (PSB) and reservation state block (RSB).

Use the undo mpls rsvp-te keep-multiplier command to restore default.

The default keep multiplier is 3.

The following equation determines the timeout time of the state stored in PSB and 
RSB:

Expired_Time = (keep-multiplier + 0.5) 

× 1.5 × refresh-time

Where, refresh-time is the refresh interval for reservation state set by the mpls 
rsvp-te timer refresh command.

Before you can configure the keep multiplier, enable RSVP-TE.

# Set the keep multiplier to five.

<Sysname> system-view

[Sysname] mpls

[Sysname-mpls] mpls rsvp-te keep-multiplier 5