3com MSR 20-20 참조 매뉴얼

C

HAPTER

 97: MPLS L2VPN C

ONFIGURATION

 C

OMMANDS

tunnel-policy-name: Tunneling policy for the VC, a string of 1 to 19 characters.

Use the connection command to create a Kompella connection.

Use the undo connection command to delete a Kompella connection on a CE 
interface.

When creating a Kompella connection, you must specify the ID of the peer CE and 
the local CE interface.

If you do not specify the tunneling policy, or specify the tunneling policy name but 
do not configure the policy, the default policy is used. The default tunneling policy 
uses LSP tunnels and the load balance number of one.

# Create a Kompella connection.

<Sysname> system-view

[Sysname] mpls l2vpn vpn1

[Sysname-mpls-l2vpn-vpn1] ce ce1

[Sysname-mpls-l2vpn-ce-vpn1-ce1] connection ce-offset 1 interface serial 2/0 

display bgp l2vpn { all | group [ group-name ] | peer  [ [ ip-address ] verbose ] | 
route-distinguisher route-distinguisher [ ce-id ce-id [ label-offset label-offset ] ] }

Any view

all: Displays all L2VPN information.

group-name: Name of the peer group, a string of 1 to 47 characters.

ip-address: IP address of the peer.

verbose: Displays detailed information.

route-distinguisher: Route distinguisher in the format of nn:nn or IP-address:nn. It 
can be a string of 3 to 21 characters.

ce-id: VPN CE ID of the MPLS L2VPN connection, in the range 0 to 65535. A 
remote connection requires the remote CE number.

label-offset: Label offset, in the range 0 to 65,535.

Use the display bgp l2vpn command to display information about BGP L2VPN 
in the BGP routing table.

route-distinguisher (MPLS L2VPN view).