3com MSR 20-20 참조 매뉴얼

C

HAPTER

 97: MPLS L2VPN C

ONFIGURATION

 C

OMMANDS

BGP view

None

Use the l2vpn-family command to enter BGP L2VPN address family view.

Use the undo l2vpn-family command to delete all configurations for the BGP 
L2VPN address family.

# Enter BGP L2VPN address family view.

<Sysname> system-view

[Sysname] bgp 100

[Sysname-bgp] l2vpn-family

[Sysname-bgp-af-l2vpn] 

mpls l2vc destination vcid [ tunnel-policy tunnel-policy-name ] [ control-word | 
no-control-word ]

Interface view

destination: IP address of the peer PE.

vc-id: VC ID of the L2VPN connection, in the range 1 to 4294967295.

tunnel-policy-name: Tunneling policy for the VC, a string of 1 to 19 characters.

control-word: Enables the control word option.

no-control-word: Disables the control word option.

Use the mpls l2vc command to create a Martini L2VPN connection.

Use the undo mpls l2vc command to delete the Martini connection on the CE 
interface.

■

If you do not specify the tunneling policy, or specify the tunneling policy name 
but do not configure the policy, the default policy is used. The default 
tunneling policy uses LSP tunnels and the load balance number of one.

■

Currently, only L2VPNs using ATM, PPP, FR, or HDLC encapsulation support the 
control word option.