3com MSR 20-20 참조 매뉴얼
1722
C
HAPTER
99: VAM S
ERVER
C
ONFIGURATION
C
OMMANDS
View
VPN domain view
Parameter
none: Specifies not to authenticate clients.
pap: Specifies to adopt PAP (password authentication protocol) authentication.
chap: Specifies to adopt CHAP (challenge authentication protocol) authentication.
domain name-string: Specifies the ISP domain for authentication by its name,
which is a case-insensitive string of 1 to 24 characters.
which is a case-insensitive string of 1 to 24 characters.
Description
Use the authentication-method command to configure the mode for the VAM
server to authenticate clients.
server to authenticate clients.
Use the undo authentication-method command to restore the default.
By default, CHAP authentication is adopted and the ISP domain is the default
domain of the system that you configure.
domain of the system that you configure.
Related command:
Example
# Set the VAM server to authenticate clients using CHAP.
<Sysname> system-view
[Sysname] vam server vpn 1
[Sysname-vam-server-vpn-1] authentication-method chap
display vam server address-map
Syntax
display vam server address-map { all | vpn vpn-name [ private-ip private-ip ] }
View
Any view
Parameter
all: Displays address mapping information about all registered VAM clients on the
VAM server.
VAM server.
vpn vpn-name: Displays address mapping information about all registered VAM
clients in the VPN domain. The vpn-name argument indicates the VPN domain
name, a case-insensitive string of 1 to 15 characters.
clients in the VPN domain. The vpn-name argument indicates the VPN domain
name, a case-insensitive string of 1 to 15 characters.
private-ip private-ip: Displays address mapping information about the VAM client
with the specified private IP address. The private-ip argument indicates the private
IP address of the VAM client.
with the specified private IP address. The private-ip argument indicates the private
IP address of the VAM client.
Description
Use the display vam server address-map command to display address
mapping information about the registered clients on the server.
mapping information about the registered clients on the server.
Example
# Display mapping information of the VAM clients in VPN domain 1.
<Sysname> display vam server address-map vpn 1
VPN name:
1