3com MSR 20-20 참조 매뉴얼
1775
106
T
RAFFIC
S
HAPING
C
ONFIGURATION
C
OMMANDS
display qos gts interface
Syntax
display qos gts interface [ interface-type interface-number ]
View
Any view
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Description
Use the display qos gts interface command to view GTS configuration and
accounting information of certain interface or all interfaces.
accounting information of certain interface or all interfaces.
If no interface is specified, the GTS configuration and running statistics of all
interfaces will be displayed.
interfaces will be displayed.
Examples
# Display GTS configuration and accounting information of all interfaces.
<Sysname> display qos gts interface
Interface: Ethernet1/0
Rule(s): If-match ACL
2001
CIR
200(kbps),
CBS
50000(byte),
EBS
0(byte)
Queue Length: 100 (Packet)
Queue Size: 70 (Packet)
Passed:
0/0 (Packets/Bytes)
Discarded:
0/0 (Packets/Bytes)
Delayed:
0/0 (Packets/Bytes)
Table 474 Description on the fields of the display qos gts command
Field Description
Interface
Interface name, consisting of interface type and interface number
Rule(s)
Matching rules of packets, which can be any of the three
CIR
Committed Information Rate, in kbps
CBS
Committed Burst Size, i.e. the depth of token bucket carrying burst traffic, in
byte
byte
EBS
Excess Burst Size, i.e. the size of the burst traffic exceeding the committed
traffic in dual-token bucket algorithm, in byte
traffic in dual-token bucket algorithm, in byte
Queue Length
Length of packets that a buffer queue can hold.
Queue Size
Number of packets in the current buffer
Passed
Number and byte number of passed packets.