3com MSR 20-20 참조 매뉴얼
1795
Parameters
cpu: Redirects to CPU.
interface: Redirects to specified interface.
next-hop: Redirects to the next hop.
interface-type interface-number: Specifies an interface by its type and number.
Description
User the redirect command to configure redirect action for traffic behavior.
User the undo redirect command to delete the configuration.
c
CAUTION: When redirect action for QoS is configured, if the outbound interface
to be redirected to is bound with an NAT virtual interface, packets sent from this
outbound interface will be redirected to the L3+NAT card, resulting in QoS
redirection failure.
to be redirected to is bound with an NAT virtual interface, packets sent from this
outbound interface will be redirected to the L3+NAT card, resulting in QoS
redirection failure.
Examples
# Configure redirect action for traffic behavior, to the interface Ethernet1/0.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] redirect interface ethernet1/0
remark atm-clp
Syntax
remark atm-clp atm-clp-value
undo remark atm-clp
View
Traffic behavior view
Parameters
atm-clp-value: Value of the cell loss priority (CLP) bit in ATM cells, 0 or 1.
Description
Use the remark atm-clp command to have the system remark the CLP bit of
ATM cells in the class.
ATM cells in the class.
Use the undo remark atm-clp command to disable remarking the CLP bit of
ATM cells.
ATM cells.
By default, the CLP bit of ATM cells is not remarked.
The policy that includes CLP remark can apply only on the outbound direction of
interfaces or ATM PVCs.
interfaces or ATM PVCs.
Examples
# Remark the CLP bit of ATM cells to 1.
<Sysname> system-view
[Sysname] traffic behavior database
[Sysname-behavior-database] remark atm-clp 1