3com MSR 20-20 참조 매뉴얼
1845
120
P
ORT
P
RIORITY
T
RUST
M
ODE
C
ONFIGURATION
C
OMMANDS
display qos trust interface
Syntax
display qos trust interface [ interface-type interface-number ]
View
Any view
Parameters
interface-type interface-number: Specifies an interface by its type and number.
Description
Use the display qos trust interface command to display the information about
the port priority trust mode currently configured.
the port priority trust mode currently configured.
If no interface is specified, the port priority trust mode of all interfaces will be
displayed.
displayed.
Examples
# Display the information about the port priority trust mode currently configured.
<Sysname> display qos trust interface ethernet 1/0
Interface: Ethernet1/0
Port priority information
Port priority :4
qos trust
Syntax
qos trust dot1p
undo qos trust
View
L2 module Ethernet interface view/port group view
Parameters
dot1p: Specifies to trust 802.1p priority carried with a packet, and perform
priority mapping using this priority.
priority mapping using this priority.
Table 489 Description on the fields of the display qos trust interface command
Field Description
Interface
Interface name, consisting of interface type and interface number
Port priority
Port priority