3com MSR 20-20 참조 매뉴얼
1869
display dar protocol-statistic
Syntax
display dar protocol-statistic [ protocol protocol-name | top top-number | all ]
[ interface interface-type interface-number ] [ direction { in | out } ]
[ interface interface-type interface-number ] [ direction { in | out } ]
View
Any view
Parameters
protocol protocol-name: Displays specified protocol, in the same range with the
protocol-name defined in the if-match protocol command.
protocol-name defined in the if-match protocol command.
top top-number: Displays the newest protocols of the traffic in top-number, in the
range 1 to 16.
range 1 to 16.
all: Displays all protocol packets; it defaults not to display the statistics packets
and the protocol packets in 0 byte.
and the protocol packets in 0 byte.
interface-type interface-number: Specifies an interface by its type and number.
direction: Specifies the direction to display traffic. By default, it is bi-directional.
in: Displays the traffic on the inbound direction.
out: Displays the traffic on the outbound direction.
Description
Use the display dar protocol-statistic command to display DAR packet
statistics information.
statistics information.
Examples
# Display statistics information about all protocol packets.
<Sysname> display dar protocol-statistic
Interface: Ethernet0/0
Port
In/Out
Packet Count
Byte Count
Bit Rate
Max Bit Rate
in 5 min
in 5 min
(bps)
(bps)
-------- ------ ------------- --------------- ------------ -----------
ftp
IN
33
1034
23
44
OUT
10
650
0
0
http
IN
24
948
11
20
bgp
IN
1
72
10
12
Total
IN
58
2054
44
76
OUT
10
650
0
0
Interface: Ethernet2/0
Port
In/Out
Packet Count
Byte Count
Bit Rate
Max Bit Rate
in 5 min
in 5 min
(bps)
(bps)
-------- ------ ------------- --------------- ------------ -----------
bgp
OUT
23
1480
110
112
Total
OUT
23
1480
110
112
Table 497 Description on the fields of the display dar protocol-statistic command
Field Description
Port Protocol
name
In/Out
Direction in which the packet is transmitted
(inbound/outbound)
(inbound/outbound)