3com MSR 20-20 참조 매뉴얼
1892
C
HAPTER
125: FR Q
O
S C
ONFIGURATION
C
OMMANDS
Examples
# Enable FRTS on the serial interface Serial 1/0.
<Sysname> system-view
[Sysname] interface Serial1/0
[Sysname-Serial1/0] fr traffic-shaping
fragment
Syntax
fragment [ fragment-size ]
undo fragment [ fragment-size ]
View
Frame relay class view
Parameters
fragment-size: Size of a fragment, in byte, ranging from 16 to 1600. By default,
the fragment size is of 45 bytes.
the fragment size is of 45 bytes.
Description
Use the fragment command to enable the FRF.12-compliant fragmentation
function on FR virtual circuit.
function on FR virtual circuit.
Use the undo fragment command to disable this function.
By default, the fragmentation function on FR virtual circuit is disabled.
Related commands:
Examples
# Configure fragment size as 128 in the FR class named test1.
<Sysname> system-view
[Sysname] fr class test1
[Sysname-fr-class-test1] fragment 128
fr-class
Syntax
fr-class class-name
undo fr-class class-name
View
Frame relay DLCI view/Frame relay interface view
Parameters
class-name: Name of a FR class, a string of 1 to 30 characters.
Description
Use the fr-class command to associate a FR class with the current FR virtual circuit
or FR interface.
or FR interface.
Use the undo fr-class command to remove the association between a FR class
and the FR virtual circuit or FR interface.
and the FR virtual circuit or FR interface.
By default, there is no association between a FR class and the FR virtual circuit or
FR interface.
FR interface.