3com MSR 20-20 참조 매뉴얼
1959
Use the undo primary accounting command to restore the defaults.
By default, the default IP address is 0.0.0.0, and the default port number 1813.
Note that:
■
The IP addresses of the primary and secondary accounting servers cannot be
the same. Otherwise, the configuration fails.
the same. Otherwise, the configuration fails.
■
The RADIUS service port configured on the device and that of the RADIUS
server must be consistent.
server must be consistent.
Related command:
Example
# Set the IP address of the primary accounting server for RADIUS scheme radius1
to 10.110.1.2 and the UDP port of the server to 1813.
to 10.110.1.2 and the UDP port of the server to 1813.
<Sysname> system-view
[Sysname] radius scheme radius1
[Sysname-radius-radius1] primary accounting 10.110.1.2 1813
primary authentication (RADIUS scheme view)
Syntax
primary authentication ip-address [ port-number ]
undo primary authentication
View
RADIUS scheme view
Parameter
ip-address: IP address of the primary authentication/authorization server.
port-number: UDP port number of the primary authentication/authorization
server, which ranges from 1 to 65535.
server, which ranges from 1 to 65535.
Description
Use the primary authentication command to configure the IP address and UDP
port of the primary RADIUS authentication/authorization server.
port of the primary RADIUS authentication/authorization server.
Use the undo primary authentication command to restore the defaults.
By default, the default IP address is 0.0.0.0, and the default port number 1812.
Note that:
■
After creating a RADIUS scheme, you are supposed to configure the IP address
and UDP port of each RADIUS server (primary/secondary
authentication/authorization or accounting server). The configuration of
RADIUS servers is at your discretion except that there must be at least one
authentication/authorization server and one accounting server. Besides, ensure
that the RADIUS service port settings on the device are consistent with the port
settings on the RADIUS servers.
and UDP port of each RADIUS server (primary/secondary
authentication/authorization or accounting server). The configuration of
RADIUS servers is at your discretion except that there must be at least one
authentication/authorization server and one accounting server. Besides, ensure
that the RADIUS service port settings on the device are consistent with the port
settings on the RADIUS servers.
■
The IP addresses of the primary and secondary authentication/authorization
servers cannot be the same. Otherwise, the configuration fails.
servers cannot be the same. Otherwise, the configuration fails.