3com MSR 20-20 참조 매뉴얼

C

HAPTER

 128: RADIUS C

ONFIGURATION

 C

OMMANDS

Use the undo timer realtime-accounting command to restore the default.

Note that:

■

For real-time accounting, a NAS must transmit the accounting information of 
online users to the RADIUS accounting server periodically. This command is for 
setting the interval.

■

The setting of the real-time accounting interval somewhat depends on the 
performance of the NAS and the RADIUS server: a shorter interval requires 
higher performance. You are therefore recommended to adopt a longer 
interval when there are a large number of users (more than 1000, inclusive). 
The following table lists the recommended ratios of the interval to the number 
of users.

retry realtime-accounting, radius scheme.

# Set the real-time accounting interval to 51 minutes for RADIUS scheme radius1.

<Sysname> system-view

[Sysname] radius scheme radius1

[Sysname-radius-radius1] timer realtime-accounting 51 

timer response-timeout seconds

RADIUS scheme view

seconds: RADIUS server response timeout period in seconds. It ranges from 1 to 10 
and defaults to 3.

Use the timer response-timeout command to set the RADIUS server response 
timeout timer.

Use the undo timer command to restore the default.

Note that:

■

If a NAS receives no response from the RADIUS server in a period of time after 
sending a RADIUS request (authentication/authorization or accounting 
request), it has to resend the request so that the user has more opportunity to 

Table 512   Recommended ratios of the accounting interval to the number of users

1 to 99 

3 

100 to 499 

6 

500 to 999 

12 

1000 or more 

15 or more