3com MSR 20-20 참조 매뉴얼

C

HAPTER

 129: HWTACACS C

ONFIGURATION

 C

OMMANDS

Use the undo timer realtime-accounting command to restore the default.

Note that:

■

For real-time accounting, a NAS must transmit the accounting information of 
online users to the HWTACACS accounting server periodically. This command is 
for setting the interval.

■

The setting of the real-time accounting interval somewhat depends on the 
performance of the NAS and the HWTACACS server: a shorter interval requires 
higher performance. You are therefore recommended to adopt a longer 
interval when there are a large number of users (more than 1000, inclusive). 
The following table lists the recommended ratios of the interval to the number 
of users.

# Set the real-time accounting interval to 51 minutes for HWTACACS scheme 
hwt1.

<Sysname> system-view

[Sysname] hwtacacs scheme hwt1

[Sysname-hwtacacs-hwt1] timer realtime-accounting 51 

timer response-timeout seconds

HWTACACS scheme view

seconds: HWTACACS server response timeout period in seconds. It ranges from 1 
to 300 and defaults to 5.

Use the timer response-timeout command to set the HWTACACS server 
response timeout timer.

Use the undo timer command to restore the default.

As HWTACACS is based on TCP, the timeout of the server response timeout timer 
and/or the TCP timeout timer will cause the device to be disconnected from the 
HWTACACS server.

Table 514   Recommended ratios of the accounting interval to the number of users

1 to 99 

3 

100 to 499 

6 

500 to 999 

12 

1000 or more 

15 or more