3com MSR 20-20 참조 매뉴얼

C

HAPTER

 133: NAT C

ONFIGURATION

 C

OMMANDS

Use the connection-limit default amount command to set the limit(s) of user 
connections globally.

Use the undo connection-limit default amount command to restore the 
default.

By default, the upper limit is 100 and the lower limit is 20.

# Configure the upper limit as 200 and lower limit as 50.

<Sysname> system-view

[Sysname] connection-limit default amount upper-limit 200 lower-limit 50 

System view

None

Use the connection-limit enable command to enable the connection-limit 
function.

Use the undo connection-limit enable command to disable this function.

By default, the connection-limit function is disabled.

Once this function is enabled, both the connection number and the connection 
rate are limited.

# Enable the connection-limit function.

<Sysname> system-view

[Sysname] connection-limit enable 

connection-limit policy policy-number

undo connection-limit policy { policy-number | all }

System view

policy-number: Connection-limit policy number, in the range 0 to 19.

all: Deletes all connection-limit policies.