3com MSR 20-20 참조 매뉴얼
2019
Example
# Display connection-limit statistics.
<Sysname> display connection-limit statistics
source-ip
dest-ip
dest-port
vpn-instance
192.168.0.210
---
---
---
--------------------------------------------------------------------------
NAT
amount
upper-limit
lower-limit
limit-flag
2
200
100
0
source-ip
dest-ip
dest-port
vpn-instance
192.168.0.210
---
---
---
--------------------------------------------------------------------------
NAT
amount
upper-limit
lower-limit
limit-flag
2
50
20
0
display nat address-group
Syntax
display nat address-group
View
Any view
Parameter
None
Description
Use the display nat address-group command to display the NAT address pool
information.
information.
Example
# Display the NAT address pool information.
<Sysname> display nat address-group
NAT address-group information:
There are currently 1 nat address-group(s)
1 : from
202.110.10.10
to
202.110.10.15
Table 522 Description on the fields of the display connection-limit statistics command
Field Description
source-ip Source
IP
address
dest-ip
Destination IP address
dest-port
Destination port number
vpn-instance
Name of the MPLS VPN instance that a connection belongs to
amount
Number of connections allowed to establish
upper-limit
Upper limit of connections
lower-limit
Lower limit of connections
limit-flag
Whether new connections are allowed, 0 means yes, 1 means no
Table 523 Description on the fields of the display nat address-group command
Field Description
NAT address-group information
NAT address pool information
There are currently 1 nat address-group(s)
There is one NAT address group
1 : from 202.110.10.10 to 202.110.10.15
The range of IP addresses in address pool 1
is from 202.110.10.10 to 202.110.10.15
is from 202.110.10.10 to 202.110.10.15