3com MSR 20-20 참조 매뉴얼

source-acl6-number: Number of an existing IPv6 ACL, which must be in the 
following ranges (the available ACL number ranges varies by device):

■

2000 to 2999 for basic IPv6 ACLs

■

3000 to 3999 for advanced IPv6 ACLs

source-acl6-name: Name of an existing IPv6 ACL, a case insensitive string of 1 to 
32 characters. It must start with an English letter and cannot be the English word 
of all to avoid confusion.

dest-acl6-number: Number of a non-existent IPv6 ACL, which must be in the 
following ranges (the available ACL number ranges varies by device):

■

2000 to 2999 for basic IPv6 ACLs

■

3000 to 3999 for advanced IPv6 ACLs

dest-acl6-name: Name for the new IPv6 ACL, a case insensitive string of 1 to 32 
characters. It must start with an English letter and cannot be the English word of 
all to avoid confusion. The system will automatically assign the new ACL a 
sequence number which is the smallest one among the available ones in the ACL 
range for the ACL type.

Use the acl ipv6 copy command to copy an existent IPv6 ACL (namely, the 
source IPv6 ACL) to generate a new one (namely, the destination IPv6 ACL), which 
is of the same type and has the same match order, match rules, rule numbering 
step and descriptions.

Note that:

■

The source IPv6 ACL and the destination IPv6 ACL must be of the same type.

■

The generated ACL does not take the name of the source IPv4 ACL.

■

A simple IPv6 ACL does not support this feature.

# Copy ACL 2008 to generate ACL 2009.

<Sysname> system-view

[Sysname] acl ipv6 copy 2008 to 2009 

acl ipv6 name acl6-name

System view

acl6-name: Name of the IPv6 ACL, a case insensitive string of 1 to 32 characters. It 
must start with an English letter and cannot be the English word of all to avoid 
confusion.