3com MSR 20-20 참조 매뉴얼
140
IPS
EC
C
ONFIGURATION
C
OMMANDS
ah authentication-algorithm
Syntax
ah authentication-algorithm { md5 | sha1 }
undo ah authentication-algorithm
View
IPSec proposal view
Parameter
md5: Uses MD5.
sha1: Uses SHA1.
Description
Use the ah authentication-algorithm command to specify the authentication
algorithm for the authentication header (AH) protocol.
algorithm for the authentication header (AH) protocol.
Use the undo ah authentication-algorithm command to restore the default.
By default, MD5 is used.
Note that you need to use the transform command to specify the security
protocol as AH or both AH and ESP before specifying the authentication algorithm
for AH.
protocol as AH or both AH and ESP before specifying the authentication algorithm
for AH.
Related command:
Example
# Configure IPSec proposal prop1 to use AH and SHA1.
<Sysname> system-view
[Sysname] ipsec proposal prop1
[Sysname-ipsec-proposal-prop1] transform ah
[Sysname-ipsec-proposal-prop1] ah authentication-algorithm sha1
cryptoswitch fabric enable
Syntax
cryptoswitch fabric enable
undo cryptoswitch fabric enable
View
System view