3com MSR 20-20 참조 매뉴얼
2142
C
HAPTER
140: IPS
EC
C
ONFIGURATION
C
OMMANDS
[Sysname] ipsec policy policy1 100 manual
[Sysname-ipsec-policy-manual-policy1-100] proposal prop1
reset encrypt-card fast-switch
Syntax
reset encrypt-card fast-switch
View
User view
Parameter
None
Description
Use the reset encrypt-card fast-switch command to clear encryption card fast
switching entries.
switching entries.
Note that:
■
This command clears all the fast switching entries. All IP fast switching entries
using the encryption card interface as the inbound interface or outbound
interface will also be cleared.
using the encryption card interface as the inbound interface or outbound
interface will also be cleared.
■
Once cleared by this command, the fast switching entries cannot be restored.
■
Some other actions or events can also clear encryption card fast switching
entries, such as disabling the encryption card, resetting the encryption card,
hot plugging the encryption card, unbinding a policy and clearing the SA.
entries, such as disabling the encryption card, resetting the encryption card,
hot plugging the encryption card, unbinding a policy and clearing the SA.
Related command:
Example
# Clear all encryption card fast switching entries.
<sysname> reset encrypt-card fast-switch
reset ipsec sa
Syntax
reset ipsec sa [ parameters dest-address protocol spi | policy policy-name
[ seq-number ] | remote ip-address ]
[ seq-number ] | remote ip-address ]
View
User view
Parameter
parameters dest-address protocol spi: Specifies the destination address, security
protocol and SPI (Security Parameter Index) of an SA.
protocol and SPI (Security Parameter Index) of an SA.
dest-address: Destination address in dotted decimal notation.
protocol: Security protocol, which can be keyword ah or esp, case insensitive.
spi: Security parameter index in the range 256 to 4294967295.
policy: Specifies an IPSec policy.