3com MSR 20-20 참조 매뉴얼

Use the display ike proposal command to display the settings of all IKE 
proposals.

This command displays the configuration information of all IKE proposals in the 
descending order of proposal priorities.

authentication-method on page 1721, ike proposal, encryption-algorithm 
on page 1725, authentication-algorithm on page 1721, dh, sa duration.

# Display the settings of IKE proposals.

<Sysname> display ike proposal

priority authentication authentication encryption Diffie-Hellman duration

method

algorithm

algorithm

group

(seconds)

--------------------------------------------------------------------------

10

PRE_SHARED

SHA

DES_CBC

MODP_1024

5000

11

PRE_SHARED

MD5

DES_CBC

MODP_768

50000

default

PRE_SHARED

SHA

DES_CBC

MODP_768

86400 

display ike sa [ verbose [ connection-id connection-id | remote-address 
remote-address ] ]

Any view

verbose: Displays detailed information.

connection-id: Displays detailed information about IKE SAs by connection ID, in 
the range 1 to 2000000000.

remote-address: Displays detailed information about IKE SAs by remote address.

Use the display ike sa command to display information about the current IKE 
SAs.

Note that the command displays brief information about the current IKE SAs if you 
specify no parameters or keywords.

ike proposal, ike peer (system view).

Table 571   Description on the fields of the display ike proposal command

priority 

Priority of the IKE proposal 

authentication method 

Authentication method used by the IKE proposal 

authentication algorithm 

Authentication algorithm used by the IKE proposal 

encryption algorithm 

Encryption algorithm used by the IKE proposal 

Diffie-Hellman group 

DH group used in IKE negotiation in phase 1 

duration (seconds) 

ISAKMP SA lifetime of the IKE proposal in seconds