3com MSR 20-20 참조 매뉴얼

C

HAPTER

 146: IP

V

4-B

ASED

 VRRP C

ONFIGURATION

 C

OMMANDS

reset vrrp statistics [ interface interface-type interface-number [ vrid 
virtual-router-id ] ]

User view

interface interface-type interface-number: Clears VRRP statistics of a specified 
interface. interface-type interface-number specifies an interface by its type and 
number.

vrid virtual-router-id: Clears VRRP statistics of the specified standby group. 
virtual-router-id specifies a standby group by its group number, in the range 1 to 
255.

Use the reset vrrp statistics command to clear VRRP statistics.

If you specify both the interface and standby group, the statistics about the 
specified standby group on the specified interface are cleared; if you specify only 
the interface, the statistics about all the standby groups on the interface are 
cleared; if you specify neither, the statistics about all the standby groups on the 
device are cleared.

# Clear the statistics about all the standby groups on the device.

<Sysname> reset vrrp statistics 

vrrp vrid virtual-router-id authentication-mode { md5 | simple } key

undo vrrp vrid virtual-router-id authentication-mode

Auth Type Mismatch 

Number of packets with authentication failures due to 
mismatching authentication types 

Packet Length Errors 

Number of packets with VRRP packet length errors 

Address List Errors 

Number of packets with virtual IP address list errors 

Become Master 

Number of times that the router worked as the master 

Priority Zero Pkts Rcvd 

Number of received advertisements with the priority of 0 

Advertise Rcvd 

Number of received advertisements 

Advertise Sent 

Number of advertisements sent 

Global statistics 

Statistics about all standby groups 

CheckSum Errors 

Total number of packets with checksum errors 

Version Errors 

Total number of packets with version errors 

VRID Errors 

Total number of packets with VRID errors

Table 589   Description on the fields of the display vrrp statistics command