3com MSR 20-20 참조 매뉴얼

C

HAPTER

 147: VRRP C

ONFIGURATION

 C

OMMANDS

 

FOR

 IP

V

6

vrrp ipv6 vrid virtual-router-id virtual-ip virtual-address [link-local]

undo vrrp ipv6 vrid virtual-router-id [ virtual-ip virtual-address [ link-local ] ]

Interface view

virtual-router-id: VRRP standby group number, in the range 1 to 255.

virtual-address: Virtual IPv6 address.

link-local: Indicates that the virtual IPv6 address of the standby group is a link 
local address.

Use the vrrp ipv6 vrid virtual-ip link-local command to create a standby 
group and assign the first virtual IPv6 address to the specified standby group. The 
first virtual IPv6 address assigned to a standby group must be a link local address 
and only one such address is allowed in a standby group.

Use the vrrp ipv6 vrid virtual-ip command to add a virtual IPv6 address to a 
standby group.

Use the undo vrrp ipv6 vrid command to remove a standby group.

Use the undo vrrp ipv6 vrid virtual-router-id virtual-ip virtual-address 
[ link-local ] command to remove a virtual IPv6 address from a standby group.

After you remove all virtual IPv6 addresses, the standby group is automatically 
removed. Note that the first address assigned to the group must be removed the 
last.

By default, no standby group is created.

# Create standby group 1, and configure its virtual IPv6 address as fe80::10.

<Sysname> system-view

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] vrrp ipv6 vrid 1 virtual-ip fe80::10 link-local 

# Configure the virtual IPv6 address of standby group 1 as 1::10.

[Sysname-Ethernet1/0] vrrp ipv6 vrid 1 virtual-ip 1::10