3com MSR 20-20 참조 매뉴얼

다운로드
페이지 2742
2259
license register
Syntax
license register serial-number
View
User view
Parameter
serial-number: Specifies the serial number of a card, in the format of 
XXXXX-XXXXX-XXXXX-XXXXX-XXXXX-XXXXX-XXXXX, in which X represents a 
character. The character can be a letter (case sensitive), a number, + or (/).
Description
Use the license register command to register the software serial number for a 
device.
The serial number can be obtained by purchasing letter of authorization. To 
successfully register a serial number, you must enter the serial number in the 
specified format.
n
Only users at management level can execute this command.
Example
# Register the software serial number of a device.
<Sysname> system-view
[Sysname] license register VZa47-6AbBh-gtO9c-K47A0-F79D8-dE84O-tg2j0
Register successfully! 
reboot
Syntax
reboot [ slot slot-number ]
View
User view
Parameter
slot slot-number: Specifies the slot number of a card. The value range varies with 
devices.
Description
Use the reboot command to reboot a card or a device.
c
CAUTION:
This command reboots the device, thus resulting in service interruption. Please 
use it with caution.
If a primary boot file fails or does not exist, the device cannot be rebooted with 
this command. In this case, you can re-specify a primary boot file to reboot the 
device, or you can power off the device then power it on and the system 
automatically uses the secondary boot file to restart the device.
The slot keyword is applicable on an MSR 50 series router only.
Example
# Reboot the device.