3com MSR 20-20 참조 매뉴얼

backup startup-configuration to dest-addr [dest-filename ]

User view

dest-addr: IP address or name of a TFTP server. The address cannot be an IPv6 
address.

dest-filename: Target filename used to save the next startup configuration file on 
the server.

Use the backup startup-configuration command to backup the startup 
configuration file (for next startup) using a filename you specify. If you do not 
specify this filename, the original filename will be used.

■

With a device that supports main/backup function, this command only backups 
the main configuration file for next startup.

■

With a device that does not support main/backup function, this command 
backups the configuration file for next startup.

Presently, the device uses TFTP to implement backup operation.

# Backup the configuration file for next startup on the TFTP server with IP address 
2.2..2.2, using the filename config.cfg.

<Sysname> backup startup-configuration to 2.2.2.2 config.cfg

Backup next startup-configuration file to 2.2.2.2, please wait...

finished!

<Sysname> 

display saved-configuration [ by-linenum ]

Any view