3com MSR 20-20 참조 매뉴얼

C

HAPTER

 158: FTP C

LIENT

 C

ONFIGURATION

 C

OMMANDS

Use the open command to log onto the IPv4 FTP server under FTP client view.

At login, you will be asked to enter the username and password for accessing the 
FTP server. If your input is correct, the login succeeds; otherwise, it fails.

# In FTP client view, log onto the FTP server with the IP address of 192.168.1.50..

<Sysname> ftp

[ftp] open 192.168.1.50

Trying 192.168.1.50 ...

Press CTRL+K to abort

Connected to 192.168.1.50.

220 FTP service ready.

User(192.168.1.50:(none)):aa

331 Password required for aa.

Password:

230 User logged in.

[ftp] 

open ipv6 server-address [ service-port ] [ -i interface-type interface-number ]

FTP client view

server-address: IP address or host name of the remote FTP server.

service-port: Port number of the remote FTP server, in the range 0 to 65535. The 
default value is 21.

-i interface-type interface-number: Specifies the egress interface by it type and 
number. This parameter can be used only in case that the FTP server address is the 
link local address and the specified egress interface must have a link local address 
(For the configuration of link local address, see “IPv6 Basics Configuration 
Commands” on page 829).

Use the open ipv6 command to log onto IPv6 FTP server in FTP client view.

At login, you will be asked to enter the username and password for accessing the 
FTP server. If your input is correct, the login succeeds; otherwise, it fails.

# Log onto the FTP server (with IPv6 address 3000::200) in FTP client view.

<Sysname> ftp

[ftp] open ipv6 3000::200

Trying 3000::200 ...

Press CTRL+K to abort