3com MSR 20-20 참조 매뉴얼

C

HAPTER

 162: B

ASIC

 C

ONFIGURATION

 C

OMMANDS

# Display the users entering system view at the same time.

<Sysname> display configure-user

Idx UI

Delay

Type Userlevel

+ 178 VTY 0

01:10:16 TEL

3

+ 179 VTY 1

00:00:00 TEL

3

Following are more details.

VTY 0

:

Location: 192.168.1.59

VTY 1

:

Location: 192.168.1.54

+

: User-interface is active.

F

: User-interface is active and work in async mode. 

display current-configuration  [ [ configuration [ configuration ] | controller | 
interface [ interface-type ] [ interface-number ] ]  [ by-linenum ] [ | { begin | include | 
exclude } text ] ]

Any view

configuration [ configuration ]: Specifies to display non-interface configuration. 
If no parameter is used, all the non-interface configuration is displayed; if 
parameters are used, display the specified information. For example:

■

isis: Displays the isis configuration.

■

isp: Displays the ISP configuration.

■

post-system: Displays the post-system configuration.

■

radius-template: Displays the Radius template configuration.

■

system: Displays the system configuration.

■

user-interface: Displays the user interface configuration.

controller: Displays the controller configuration (For example CE1/PRI interface. 
Refer to “display controller e1” on page 205.).

interface [ interface-type ] [ interface-number ]: Displays the interface 
configuration, where interface-type indicates the interface type and 
interface-number indicates the interface number.

by-linenum: Specifies to display the number of each line.

|: Specifies to use regular expression to filter the configuration of display device.

■

begin: Displays the configuration beginning with the specified text.

■

include: Displays the configuration including the specified text.

■

exclude: Displays the configuration excluding the specified text.