3com MSR 20-20 참조 매뉴얼

**************************************************************************

* All rights reserved (2004-2006)

*

* Without the owner’s prior written consent,

*

* No decompiling or reverse-switch fabricering shall be allowed.

*

**************************************************************************

Welcome to legal(header legal)

Press Y or ENTER to continue, N to exit.

Welcome to motd(header motd)

Welcome to login(header login)

Login authentication

Password:

Welcome to shell(header shell)

<Sysname> 

hotkey { CTRL_G | CTRL_L | CTRL_O | CTRL_T | CTRL_U } command

undo hotkey { CTRL_G | CTRL_L | CTRL_O | CTRL_T | CTRL_U }

System view

CTRL_G: Assigns the hot key <Ctrl+G> to a command.

CTRL_L: Assigns the hot key <Ctrl+L> to a command.

CTRL_O: Assigns the hot key <Ctrl+O> to a command.

CTRL_T: Assigns the hot key <Ctrl+T> to a command.

CTRL_U: Assigns the hot key <Ctrl+U> to a command.

command: The command line associated with the hot key.

Use the hotkey command to assign a hot key to a command line.

Use the undo hotkey command to restore the default.

By default, the system specifies corresponding commands for <Ctrl+G>, <Ctrl+L> 
and <Ctrl+O>, while the others are null.

■

<Ctrl+G> corresponds to display current-configuration

■

<Ctrl+L> corresponds to display ip routing-table

■

<Ctrl+O> corresponds to undo debugging all

You can customize this scheme as needed however.

# Assign the hot key <Ctrl+T> to the display tcp status command.