3com MSR 20-20 참조 매뉴얼

cipher: Cipher text password.

password: Password, a string of characters. It is case-sensitive string.

■

For simple password, it is a string of 1 to 16 characters.

■

For cipher password, it is a string of 1 to 16 characters in plain text or 24 
characters in cipher text. For example, the simple text “1234567” corresponds 
to the cipher text “(TT8F]Y5SQ=^Q‘MAF4<1!!”.

Use the super password command to set the password needed to switch from a 
lower user level to a higher one.

Use the undo super password command to restore the default.

By default, no password is set to switch from a lower user level to a higher one.

Note that:

■

If simple is specified, the configuration file saves a simple password.

■

If cipher is specified, the configuration file saves a cipher password.

■

The user must always enter a simple password, no matter simple or cipher is 
specified.

■

Cipher passwords are recommended, as simple ones are easily getting cracked.

# Set the password to abc in simple form for switching user-level to 3.

<Sysname> system-view

[Sysname] super password level 3 simple abc 

# Display the password for switching user-level.

[Sysname] display current-configuration

#

super password level 3 simple abc 

# Set the password to abc in cipher form for switching user-level to 3.

<Sysname> system-view

[Sysname] super password level 3 cipher abc 

# Display the password for switching user-level.

[Sysname] display current-configuration

#

super password level 3 cipher =‘*Y=F>*.%-a_SW8MYM2A!! 

sysname sysname