3com MSR 20-20 참조 매뉴얼
2434
C
HAPTER
163: I
NFORMATION
C
ENTER
C
ONFIGURATION
C
OMMANDS
info-center enable
Syntax
info-center enable
undo info-center enable
View
System view
Parameter
None
Description
Use the info-center enable command to enable information center.
Use the undo info-center enable command to disable the information center.
The system outputs information to the log host or the console only after the
information center is enabled first.
information center is enabled first.
By default, the information center is enabled.
Example
# Enable the information center.
<Sysname> system-view
[Sysname] info-center enable
% Information center is enabled
info-center logbuffer
Syntax
info-center logbuffer [ channel { channel-number | channel-name } | size buffersize ]
*
*
undo info-center logbuffer [ channel | size ]
View
System view
Parameter
buffersize: Specifies the maximum number of log messages in a log buffer, in the
range 0 to 1,024 with 512 as the default value.
range 0 to 1,024 with 512 as the default value.
channel-number: A specified channel number, in the range 0 to 9.
channel-name: Specifies a channel name, which could be a default name or one
that is defined by the user. The user needs to specify a channel name first before
using it as a self-defined channel name. For more information, refer to
“info-center channel name” on page 2432.
that is defined by the user. The user needs to specify a channel name first before
using it as a self-defined channel name. For more information, refer to
“info-center channel name” on page 2432.
Description
Use the info-center logbuffer command to enable information output to a log
buffer and set the corresponding parameters.
buffer and set the corresponding parameters.
Use the undo info-center logbuffer command to disable information output
to a log buffer.
to a log buffer.