3com MSR 20-20 참조 매뉴얼
2437
Parameter
dir-name: The name of the directory where a log file is saved, a string of 1 to 64
characters.
characters.
Description
Use the info-center logfile switch-directory command to configure the
directory where a log file is saved. For a device supporting CF partition, the
directory to save a log file is the logfile directory in the second partition (cf1:) of
the storage device. Ensure that the directory is created first before saving a log file
into it.
directory where a log file is saved. For a device supporting CF partition, the
directory to save a log file is the logfile directory in the second partition (cf1:) of
the storage device. Ensure that the directory is created first before saving a log file
into it.
By default, the directory to save a log file is the logfile directory under the root
directory of the storage device.
directory of the storage device.
Note that this command can be used to manually configure the directory to which
a log file can be saved. The configuration will lose after system restarts or
primary/backup switchover.
a log file can be saved. The configuration will lose after system restarts or
primary/backup switchover.
Example
# Create a directory with the name test under cf root directory.
<Sysname> mkdir test
%Created dir cf:/test.
# Set the directory to save the log file to cf:/test.
<Sysname> system-View
[Sysname] info-center logfile switch-directory cf:/test
info-center loghost
Syntax
info-center loghost host-ip [ channel { channel-number | channel-name } facility
local-number ] *
local-number ] *
undo info-center loghost host-ip
View
System view
Parameter
host-ip: The IP address of the log host.
channel: Specifies the channel through which system information can be output
to the log host.
to the log host.
channel-number: Specifies a channel number, in the range 0 to 9.
channel-name: Specifies a channel name, which could be a default name or one
that is defined by the user. The user needs to specify a channel name first before
using it as a self-defined channel name. For more information, refer to
“info-center channel name” on page 2432.
that is defined by the user. The user needs to specify a channel name first before
using it as a self-defined channel name. For more information, refer to
“info-center channel name” on page 2432.
facility local-number: The logging facility of the log host The value can be local0
to local7 and defaults to local7.
to local7 and defaults to local7.
Description
Use the info-center loghost command to specify a log host and to configure
the related parameters.
the related parameters.