3com MSR 20-20 참조 매뉴얼
2442
C
HAPTER
163: I
NFORMATION
C
ENTER
C
ONFIGURATION
C
OMMANDS
info-center synchronous
Syntax
info-center synchronous
undo info-center synchronous
View
System view
Parameter
None
Description
Use the info-center synchronous command to enable synchronous information
output.
output.
Use the undo info-center synchronous command to disable the synchronous
information output.
information output.
By default, the synchronous information output is disabled.
n
■
Under the current command line prompt, if the user’s input is interrupted by
system output such as log information, then after the completion of system
output the system will not display command line prompt.
system output such as log information, then after the completion of system
output the system will not display command line prompt.
■
When users need to input some interactive information (non Y/N confirmation
information) if the user’s input is interrupted by system information, then after
the completion of system output the system will not display command line
prompt but just print the user’s input.
information) if the user’s input is interrupted by system information, then after
the completion of system output the system will not display command line
prompt but just print the user’s input.
Example
# Enable synchronous information output.
<Sysname> system-view
[Sysname] info-center synchronous
% Info-center synchronous output is on
# The user receives trap messages when he/she is about to display the
configurations for an Ethernet interface by inputting the display interface ethe
command. After the system has finished its output of trap messages, it will display
the user’s original input, which is “display interface ethe” in this case.
configurations for an Ethernet interface by inputting the display interface ethe
command. After the system has finished its output of trap messages, it will display
the user’s original input, which is “display interface ethe” in this case.
<Sysname> system-view
[Sysname] display interface ethe
%Apr 29 08:12:44:71 2007 AR29.43 IFNET/4/LINK UPDOWN:
Ethernet2/1: link status is UP
[Sysname] display interface ethe
info-center timestamp
Syntax
info-center timestamp { debugging | log | trap } { boot | date | none }
undo info-center timestamp { debugging | log | trap }
View
System view