3com MSR 20-20 참조 매뉴얼
2472
C
HAPTER
164: U
SER
I
NTERFACE
C
ONFIGURATION
C
OMMANDS
■
This command is not supported on the AUX port if the device has only a AUX
port and no Console port.
port and no Console port.
■
This command cannot be used on the user interface from which you log in.
Example
# Disable terminal services on the VTYs 0 through 4.
<Sysname> system-view
[Sysname] user-interface vty 0 4
[Sysname-ui-vty0-4] undo shell
% Disable ui-vty0-4 , are you sure ? [Y/N] y
[Sysname-ui-vty0-4]
# The following information is displayed when a Telnet terminal logs in:
The connection was closed by the remote host!
speed (in user interface view)
Syntax
speed speed-value
undo speed
View
User interface view
Parameter
speed-value: Transmission rate in bps.
The transmission rates available with asynchronous serial interfaces include:
■
300 bps
■
600 bps
■
1200 bps
■
2400 bps
■
4800 bps
■
9600 bps
■
19200 bps
■
38400 bps
■
57600 bps
■
115200 bps
Note that the transmission rate varies with devices and configuration environment.
Description
Use the speed command to set the transmission rate on the user interface.
Use the undo speed command to restore the default transmission rate.
By default, the transmission rate is 9600 bps.