3com MSR 20-20 참조 매뉴얼

C

HAPTER

 166: P

O

E C

ONFIGURATION

 C

OMMANDS

# Enable PoE through a PoE configuration file on a PoE interface.

<Sysname> system-view

[Sysname] poe-profile abc

[Sysname-poe-profile-abc-1] poe enable

[Sysname-poe-profile-abc-1] quit

[Sysname] interface ethernet 1/1

[Sysname-Ethernet1/1]apply poe-profile name abc 

poe enable pse pse-id

undo poe enable pse pse-id

System view

pse-id: PSE ID. pse-id indicates number of the slot where a PoE interface locates.

Use the poe enable pse command to enable PoE for the PSE.

Use the undo poe enable pse command to disable PoE for the PSE.

By default, PoE is disabled for the PSE.

n

# Enable PoE for PSE 2.

<Sysname> system-view

[Sysname] poe enable pse 2 

poe legacy enable [ pse pse-id ]

undo poe legacy enable [ pse pse-id ]

System view

pse pse-id: Specifies a PSE ID. The support for the argument varies with devices. 
pse-id indicates number of the slot where a PoE interface locates.

Use the poe legacy enable command to enable the PSE to detect nonstandard 
PDs.

Use the undo poe legacy enable command to disable the PSE from detecting 
nonstandard PDs.