3com MSR 20-20 참조 매뉴얼

C

HAPTER

 166: P

O

E C

ONFIGURATION

 C

OMMANDS

System view

None

Use the poe pse-policy priority command to configure a PSE power 
management priority policy.

Use the undo poe pse-policy priority command to remove the PSE power 
management priority policy.

By default, no PSE power management priority policy is configured.

# Configure a PSE power management priority policy.

<Sysname> system-view

[Sysname] poe pse-policy priority 

poe update { full | refresh } filename [ pse pse-id ]

System view

full: Specifies to upgrade the PSE processing software in full mode when the 
software is unavailable.

refresh: Specifies to upgrade the PSE processing software in refresh mode when 
the software is available.

filename: Name of the upgrade file, a string of 1 to 64 characters. This file must be 
under the root directory of the file system of the device. The extension of the 
upgrade file varies with devices.

pse pse-id: Specifies a PSE ID. The support for this argument varies with devices. 
pse-id indicates number of the slot where a PoE interface locates.

Use the poe update command to upgrade the PSE processing software online.

# Upgrade the processing software of PSE 2 online

<Sysname> system-view

[Sysname] poe update refresh 0400_001.S19 pse 2