3com MSR 20-20 참조 매뉴얼

line line-number

POTS entity view

line-number: Number of a subscriber line.

Use the line command to associate the voice entity with a specified voice 
subscriber line.

Use the undo line command to remove this association.

By default, there is no association between a voice entity and a voice subscriber 
line.

# Associate voice entity 10 and voice subscriber line 1/0.

<Sysname> system-view

[Sysname] voice-setup

[Sysname-voice] dial-program

[Sysname-voice-dial] entity 10 pots

[Sysname-voice-dial-entity10] line 1/0 

match-template match-string

POTS/VoIP/VoFR entity view

match-string: Number template. Its format is [ + ] { string [ T ] [ $ ] | T }, with the 
maximum length of 31 characters. The characters are described in the following.

■

+: Appears at the beginning of a calling number to indicate that the number is 
E.164-compliant.

■

$: Is the last character, indicating the end of the number. That means the entire 
called number must match the string part before “$”.

■

T: Timer. It means the system is waiting the subscriber for dialing any number 
till: the number length threshold is exceeded, or the subscriber inputs the 
terminator; or the timer expires. T is used to match a number with any digits.

■

string: A string composed of any characters of “0123456789#*.!+%[]()-”. The 
meanings of the characters are described in the following table: