3com MSR 20-20 참조 매뉴얼

C

HAPTER

 178: SIP C

ONFIGURATION

 C

OMMANDS

By default, no registrar information is configured on the SIP UA.

You can use this command only when the SIP registration function is disabled.

# Configure the IP address 169.54.5.10, the port number 1120, and the aging 
time 120 seconds for the master registrar.

<Sysname> system-view

[Sysname] voice-setup

[Sysname-voice] sip

[Sysname-voice-sip] registrar ipv4 169.54.5.10 port 1120 expires 120 

User view

None

Use the reset voice sip command to clear all the statistics about the SIP client.

# Clear all the statistics about the SIP client.

<Router> reset voice sip 

Voice view

None

Use the sip command to enter SIP client view.

Before you can configure a UA, you should first enter its view with this command.

# Enter SIP client view.

<Sysname> system-view

[Sysname] voice-setup

[Sysname-voice] sip

[Sysname-voice-sip] 

sip-comp { callee | from }