3com MSR 20-20 참조 매뉴얼
2707
By default, IP address is used.
Example
# Set the domain name of the SIP device to hello.com.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] sip
[Sysname-voice-sip] sip-domain hello.com
source-ip
Syntax
source-ip ip-address
undo source-ip
View
SIP client view
Parameter
ip-address: IPv4 address.
Description
Use the source-ip command to configure the source IP address bound to the
packets sent by the UA.
packets sent by the UA.
Use the undo source-ip command to remove the configuration.
By default, no source IP address is configured to be bound to the packets sent by
the UA.
the UA.
Note that the source IP address must be already assigned to a gateway interface.
You can use this command only when the SIP registration function is disabled.
Example
# Specify 1.1.1.1 as the source IP address bound to the packets sent by the UA.
<Sysname> system-view
[Sysname] voice-setup
[Sysname-voice] sip
[Sysname-voice-sip] source-ip 1.1.1.1
user
Syntax
user username password { cipher | simple } password [ cnonce cnonce | realm
realm ] *
realm ] *
undo user
View
SIP client view/POTS entity view
Parameter
username: Username used for registration authentication, a string of 1 to 31
case-sensitive characters. The characters """ and "" are invalid.
case-sensitive characters. The characters """ and "" are invalid.