3com MSR 20-20 참조 매뉴얼

display atm map-info [ interface interface-type interface-number [ pvc { pvc-name 
[ vpi/vci ] | vpi/vci } ] ]

Any view

interface-type interface-number: Specifies an interface by its type and number.

pvc-name: PVC name, a unique string of 1 to 16 characters on ATM interface, not 
case-sensitive. The name cannot be the same as a valid VPI/VCI value pair. For 
example, the name 1/20 is not allowed.

vpi/vci: VPI/VCI pair. VPI is short for virtual path identifier; its value ranges from 0 
to 255. VCI is short for virtual channel identifier; its value range varies by interface 
type. Normally, VCI values from 0 to 31 are reserved for special purpose, you are 
not recommended to use them. For details regarding the value range, refer to 
Table 28.

Use the display atm map-info command to view the map information on an 
ATM interface.

Note that:

■

Without an interface specified, the system displays the map information for all 
ATM interfaces.

■

Without specifying the PVC name or the VPI/VCI value pair, the system displays 
the map information of all PVCs on the specified ATM interface.

# Display map information for all ATM interfaces.

<Sysname> display atm map-info

Atm1/0, PVC 1/32, PPP, Virtual-Template10, UP

Atm1/0, PVC 1/33, IP & Mask, State UP

100.11.1.1, mask 255.255.0.0, vlink 1

Atm1/0, PVC 2/101, ETH, Virtual-Ethernet1, UP

PVCs 

Number of PVCs configured on the 
interface 

MAPs 

Number of maps on the interface 

input pkts: 0, input bytes: 0, input pkt errors: 0 

Received packets, bytes, and errors 

output pkts: 69, output bytes: 2218, output pkt 
errors: 8 

Transmitted packets, bytes, and errors

Table 24   Description on the fields of the display atm interface command

Table 25   Description on the fields of the display atm map-info command

Atm1/0 Interface 

number 

PVC 1/33 

PVC identifier