3com MSR 20-20 참조 매뉴얼

C

HAPTER

 20: DCC C

ONFIGURATION

 C

OMMANDS

A link idle-timeout timer starts upon setup of a link. If no interesting packets are 
present before the timer expires, DCC disconnects the link.

If the timer is set to 0, the link will never be disconnected, regardless of whether 
there are interesting packets on the link or not.

# Set the link idle-timeout timer to 50 seconds on interface Serial 2/0.

<Sysname> system-view

[Sysname] interface serial 2/0

[Sysname-Serial2/0] dialer timer idle 50 

dialer timer wait-carrier seconds

Dial interface (physical or dialer) view

seconds: Wait-carrier timer value, setting the time waiting for call setup. This 
argument ranges from 0 to 65,535 (in seconds).

Use the dialer timer wait-carrier command to set the wait-carrier timer.

Use the undo dialer timer wait-carrier command to restore the default.

The wait-carrier timer defaults to 60 seconds.

Sometimes, the time that DCC waits for a connection to be established may vary 
call by call. To handle this situation, you may use a wait-carrier timer. A wait-carrier 
timer starts when a call is placed. If the connection is not established upon 
expiration of the timer, DCC terminates the call.

# Set the wait-carrier timer to 100 seconds on interface Serial 2/0.

<Sysname> system-view

[Sysname] interface serial 2/0

[Sysname-Serial2/0] dialer timer wait-carrier 100 

dialer user username

Dialer interface view

username: Remote username for PPP authentication, a string of 1 to 80 
characters.