3com MSR 20-20 참조 매뉴얼
366
C
HAPTER
21: B
ASIC
DLS
W
C
ONFIGURATION
C
OMMANDS
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] sdlc sap-map local 08 05
sdlc sap-map remote
Syntax
sdlc sap-map remote dsap sdlc-addr
undo sdlc sap-map remote dsap sdlc-addr
View
Synchronous serial interface view
Parameter
dsap: SAP address of the DLSw peer device, in the range of 0x01 to 0xFE.
sdlc-addr: SDLC address, in the range of 0x01 to 0xFE.
Description
Use the sdlc sap-map remote command to configure the SAP address of the
remote DLSw device for use in SDLC-to-LLC2 frame format conversion.
remote DLSw device for use in SDLC-to-LLC2 frame format conversion.
Use the undo sdlc sap-map remote command to restore the system default.
By default, the SAP address of the remote DLSw device used in SDLC-to-LLC2
frame format conversion is 0x04.
frame format conversion is 0x04.
When an SDLC frame is converted to an LLC2 frame, a SAP address is needed in
addition to the MAC address.
addition to the MAC address.
Generally speaking, the SAP address used by the SNA protocol is 0x04, 0x08 or
0x0C.
0x0C.
Related command:
Example
# Configure the SAP address of the remote DLSw device for use in SDLC-to-LLC2
frame format conversion on Serial 2/0.
frame format conversion on Serial 2/0.
<Sysname> system-view
[Sysname] interface serial 2/0
[Sysname-Serial2/0] sdlc sap-map remote 0C 05
sdlc simultaneous
Syntax
sdlc simultaneous
undo sdlc simultaneous
View
Synchronous serial interface view
Parameter
None