3com MSR 20-20 참조 매뉴얼

display mfr [ interface interface-type interface-number | verbose ]

Any view

interface interface-type interface-number: Specifies an interface by its type and 
number.

verbose: Displays detailed statistics information, including the number of 
controlling packets sent and received.

Use the display mfr command to display configuration and statistics information 
of multilink frame relay bundle and bundle link. If no bundle or bundle link is 
specified, information about all bundles and bundle links is displayed.

# Display configuration and state information about all frame relay bundles and 
frame relay bundle links.

<Sysname> display mfr

Bundle interface:MFR1, Bundle state = up,

Bundle class = A,

fragment disabled, MFR bundle fragment size = 222

original packet be assembled/fragmentized (in/out): 0/0

dropped fragment (in/out): 0/0

Bundle name = 2

Bundle links:

Serial2/0, PHY state = up, link state = up,

Link name : Serial2/0 

LMI status enquiry sent 435, LMI status received 435 

Transmitted and received LMI status 
enquiry messages 

LMI status timeout 0, LMI message discarded 0 

LMI timeout messages and dropped 
LMI messages 

Physical is MFR 

Physical interface is MFR 

Output queue: (Urgent queue: Size/Length/Discards) 
0/50/0

Output queue: (Protocol queue: Size/Length/Discards) 
0/500/0

Output queue: (FIFO queuing: Size/Length/Discards) 
0/75/0 

Statistics on the packets of the 
following interface output queues:

■

Urgent queue

■

Protocol queue

■

FIFO queue 

Last 300 seconds input: 0 bytes/sec, 0 packets/sec 

Input rate of the interface within the 
last five minutes 

Last 300 seconds output: 0 bytes/sec, 0 packets/sec 

Output rate of the interface within the 
last five minutes 

1058 packets input, 832389 bytes, 0 drops 

Packets and bytes received on the 
interface and packets dropped as the 
result of full receive buffer 

619 packets output, 828190 bytes, 0 drops 

Packets and bytes transmitted on the 
interface and packets dropped as the 
result of full transmit buffer

Table 49   Description on the fields of the display interface mfr command