3com MSR 20-20 참조 매뉴얼

gvrp registration { fixed | forbidden | normal }

Ethernet interface view, port group view

fixed: Sets the registration type to fixed.

forbidden: Sets the registration type to forbidden.

normal: Sets the registration type to normal.

Use the gvrp registration command to configure the GVRP registration type on 
a port.

Use the undo gvrp registration command to restore the default.

The default GVRP registration type is normal.

Configured in Ethernet interface view, the setting is effective on the current port 
only; configured in port group view, the setting is effective on all ports in the port 
group.

GVRP provides the following three registration types on a port:

■

Normal -- Enables the port to dynamically register/deregister VLANs, and to 
propagate both dynamic and static VLAN information.

■

Fixed -- Disables the port to dynamically register and deregister VLANs or 
propagate information about dynamic VLANs, but allows the port to propagate 
information about static VLANs. A trunk port with fixed registration type thus 
allows only manually configured VLANs to pass through even though it is 
configured to carry all VLANs.

■

Forbidden -- Disables the port to dynamically register and deregister VLANs, 
and to propagate VLAN information except information about VLAN 1. A trunk 
port with forbidden registration type thus allows only VLAN 1 to pass through 
even though it is configured to carry all VLANs.

Note that this command is only available on trunk ports.

# Set the GVRP registration type to fixed on port Ethernet 1/0.

<Sysname> system-view

[Sysname] interface ethernet 1/0

[Sysname-Ethernet1/0] port link-type trunk

[Sysname-Ethernet1/0] gvrp registration fixed