3com MSR 20-20 참조 매뉴얼

C

HAPTER

 26: LAPB 

AND

 X.25 C

ONFIGURATION

 C

OMMANDS

User view

x121-address: Destination X.121 address, a string of 1 to 15 numerical characters.

Use the pad command to establish a X.25 PAD connection and logon to the 
remote site.

PAD is similar to telnet. It can establish the connection from the local to the 
remote through the remote X121 address to carry out configuration operations.

# Establish a PAD connection to the destination X.121 address 2.

<Sysname> pad 2 

reset xot local local-ip-address local-port remote remote-ip-address remote-port

User view

local-ip-address: Local IP address of the XOT connection.

local-port: Local port number of the XOT connection.

remote-ip-address: Remote IP address of the XOT connection.

remote-port: Remote port number of the XOT connection.

For SVC, use the reset xot command to clear an XOT link.

For PVC, use the reset xot command to reset an XOT link.

When you clear or reset the XOT link, you can obtain the required ports using the 
display x25 xot or display tcp status command.

# Clear or reset the XOT link.

<Sysname> reset xot local 10.1.1.1 1998 remote 10.1.1.2 1024 

reset x25 { counters interface interface-type interface-number | vc interface 
interface-type interface-number [ vc-number ] }

User view

counters: Resets interface statistics.

vc: Resets X.25 virtual circuit.