3com MSR 20-20 참조 매뉴얼
476
C
HAPTER
27: L
INK
A
GGREGATION
C
ONFIGURATION
C
OMMANDS
You may find that information about the remote system for a manual link
aggregation group is either replaced by none or not displayed at all. This is normal
because this type of aggregation group has no knowledge of its partner.
aggregation group is either replaced by none or not displayed at all. This is normal
because this type of aggregation group has no knowledge of its partner.
Example
# Display the link aggregation group summary.
<Sysname> display link-aggregation summary
Aggregation Group Type: S -- Static, M -- Manual
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Actor ID: 0x8000, 00e0-fcff-ff04
AL
AL
Partner ID
Select
Unselect
Share
Master
ID
Type
Ports Ports
Type
Port
-------------------------------------------------------------------
10
M
none
1
0
NonS
Ethernet1/2
20
S
0x8000,00e0-fcff-ff01 1
0
NonS
Ethernet1/3
display link-aggregation verbose
Syntax
display link-aggregation verbose [ agg-id ]
View
Any view
Parameter
agg-id: ID of an existing link aggregation group, in the range 1 to 144.
Description
Use the display link-aggregation verbose command to display detailed
information about the specified or all link aggregation groups.
information about the specified or all link aggregation groups.
You may find that information about the remote system for a manual link
aggregation group is either replaced by none or not displayed at all. This is normal
because this type of aggregation group has no knowledge of its partner.
aggregation group is either replaced by none or not displayed at all. This is normal
because this type of aggregation group has no knowledge of its partner.
Example
# Display detailed information about all the link aggregation groups.
Table 74 Description on the fields of display link-aggregation summary
Field Description
Aggregation Group Type
Aggregation group type.
■
S: static LACP aggregation
■
M: manual aggregation
Loadsharing Type
Load sharing type, which can be “Shar” (for load sharing)
and “NonS” (for non-load sharing).
and “NonS” (for non-load sharing).
Actor ID
Local system ID
AL ID
Link aggregation group ID
AL Type
Link aggregation type, which can be dynamic LACP
aggregation, static LACP aggregation, or manual
aggregation.
aggregation, static LACP aggregation, or manual
aggregation.
Partner ID
Remote system ID
Select Ports
Number of selected ports
Unselect Ports
Number of unselected ports
Share Type
Load sharing type
Master Port
Master port