3com MSR 20-20 참조 매뉴얼
28
L
INK
A
GGREGATION
D
EBUGGING
C
OMMANDS
debugging lacp packet
Syntax
debugging lacp packet [ interface interface-type interface-number [ to interface-type
interface-number ] ]
interface-number ] ]
undo debugging lacp packet [ interface interface-type interface-number [ to
interface-type interface-number ] ]
interface-type interface-number ] ]
View
User view
Default Level
1: Monitor level
Parameters
interface-type interface-number: Port type and port number.
to: Specifies the ports with their port type and port number within the port range
enclosed by the two interface-type-interface-number argument pairs around this
keyword.
enclosed by the two interface-type-interface-number argument pairs around this
keyword.
Description
Use the debugging lacp packet command to enable debugging for LACP
protocol packets on the specified port(s).
protocol packets on the specified port(s).
Use the undo debugging lacp packet command to disable debugging for
LACP protocol packets on the specified port(s).
LACP protocol packets on the specified port(s).
By default, debugging for LACP protocol packets is disabled on a port.
If no port is specified, the command applies to all the ports running LACP.
Table 76 Description on the fields of the debugging lacp packet command
Field Description
size
Size of a protocol packet, which is 128 bytes.
subtype
Sub type of a protocol packet, which is 1 for
LACP protocol packets.
LACP protocol packets.
version
Protocol version, which is 1 for LACP.