3com MSR 20-20 참조 매뉴얼
489
Examples
# Enable debugging for link aggregation errors to view the error information
prompted during the system running.
prompted during the system running.
<Sysname> debugging link-aggregation error
*0.21953 Sysname LAGG/8/lacpErrorEvent:
File e:v500d05sp1softwarelacplacp_agm.c, Line: 1200
ERROR------
Portindex: 1
LACP_SendLACPPacket ,g_ucLacpSysMAC NULL !
// File e:v500d05sp1softwarelacplacp_agm.c has a running error, which occurs at
line 1200. The ERROR field indicated that the system MAC address obtained is
null.
line 1200. The ERROR field indicated that the system MAC address obtained is
null.
debugging link-aggregation event
Syntax
debugging link-aggregation event
undo debugging link-aggregation event
View
User view
Default Level
1: Monitor level
Parameters
None
Description
Use the debugging link-aggregation event command to enable debugging
for link aggregation events.
for link aggregation events.
Use the undo debugging link-aggregation event command to disable
debugging for link aggregation events.
debugging for link aggregation events.
By default, debugging for link aggregation events is disabled.
Table 78 Description on the fields of debugging link-aggregation error command
Field Description
File
The program file that incurs a running error
Line
The number of the line where the error occurs
ERROR Error
description
Table 79 Description on the fields of debugging link-aggregation event command
Field Description
Agg Index
Aggregation group ID
Cfg MD5
MD5 digest
Restriction Value
Hardware restriction parameter
Admin Key
Administration key
Port Pri
Port LACP priority
Sys Mac
System MAC address
Sys Pri
System LACP priority
Oper Key
Port operation key