3com MSR 20-20 참조 매뉴얼
508
C
HAPTER
31: PPP
AND
MP C
ONFIGURATION
C
OMMANDS
<Sysname> system-view
[Sysname] interface mp-group 3
[Sysname-Mp-group3]
interface virtual-template
Syntax
interface virtual-ethernet number
undo interface virtual-ethernet number
View
System view
Parameter
number: VT number, ranging from 0 to 1023.
Description
Use the interface virtual-template command to create a VT or enter VT view.
Use the undo interface virtual-template command to remove a VT.
To remove a VT, make sure that all the relevant VA interfaces are removed and the
VT is not being used.
VT is not being used.
Example
# Create VT 10 interface.
<Sysname> system-view
[Sysname] interface virtual-template 10
[Sysname-Virtual-Template10]
ip address ppp-negotiate
Syntax
ip address ppp-negotiate
undo ip address ppp-negotiate
View
Interface view
Parameter
None
Description
Use the ip address ppp-negotiate command to enable IP address negotiation
on the local interface, so that the local interface can accept the IP address
allocated by the remote end.
on the local interface, so that the local interface can accept the IP address
allocated by the remote end.
Use the undo ip address ppp-negotiate command to disable IP address
negotiation.
negotiation.
By default, IP address negotiation is disabled.
Related command:
Example
# Configure the IP address of interface Serial 1/0 to be negotiable.