3com MSR 20-20 참조 매뉴얼
534
C
HAPTER
33: PPP
O
E S
ERVER
C
ONFIGURATION
C
OMMANDS
pppoe-server bind
Syntax
pppoe-server bind virtual-template number
undo pppoe-server bind
View
Interface view
Parameter
number: Number of the virtual-template interface, in the range 0 to 1023.
Description
Use the pppoe-server bind command to enable PPPoE on the virtual-template
specified by the Ethernet interface.
specified by the Ethernet interface.
Use the undo pppoe-server bind command to disable PPPoE protocol on the
relevant interface.
relevant interface.
By default, PPPoE protocol is disabled.
Example
# Enable PPPoE on interface Ethernet 1/0, and bind Virtual-Template1 with
interface Ethernet 1/0
interface Ethernet 1/0
<Sysname> system-view
[Sysname] interface ethernet 1/0
[Sysname-Ethernet1/0] pppoe-server bind virtual-template 1
pppoe-server log-information off
Syntax
pppoe-server log-information off
undo pppoe-server log-information off
View
System view
Parameter
None
Description
Use the pppoe-server log-information off command to disable the PPPoE
server to display the PPP log information.
server to display the PPP log information.
InP
In Packets, Packages received
InO
In Octets, Bytes received
InD
In Discards, Received and then discarded packages
OutP
Out Packets, Packages sent
OutO
Out Octets, Bytes sent
OutD
Out Discard, Discarded packages that might be sent
Table 85 Description on the fields of the display pppoe-server session packet command
Field Description