3com MSR 20-20 참조 매뉴얼
34
PPP
O
E C
LIENT
C
ONFIGURATION
C
OMMANDS
display pppoe-client session
Syntax
display pppoe-client session { packet | summary } [ dial-bundle-number number ]
View
Any view
Parameter
packet: Displays the statistics of PPPoE session data packet.
summary: Displays the summary of PPPoE session.
dial-bundle-number number: Displays the statistics of the specified PPPoE
session, in the range 1 to 255. If PPPoE session is not specified, the system will
display the statistics of all PPPoE sessions.
session, in the range 1 to 255. If PPPoE session is not specified, the system will
display the statistics of all PPPoE sessions.
Description
Use the display pppoe-client session command to display the state and
statistics of PPPoE session.
statistics of PPPoE session.
Example
# Display the summary of PPPoE session.
<Sysname> display pppoe-client session summary
There are 2 sessions in total:
ID
Bundle
Dialer
Intf
Client-MAC
Server-MAC
State
1
1
1
Eth1/0
00e0fc0254f3
00049a23b050
PPPUP
2
2
2
Eth1/0
00e0fc0254f3
00049a23b050
PPPUP
# Display the statistics of PPPoE session packet
<Sysname> display pppoe-client session packet
PPPoE Client Session:
ID
InP
InO
InD
OutP
OutO
OutD
=================================================================
Table 86 Description on the fields of display pppoe-client session summary
Field Description
ID
Session ID, PPPoE session ID
Server-MAC
MAC address of PPPoE server
Client-MAC
MAC address of PPPoE client
Dialer Corresponding
dialer interface of PPPoE session
Bundle
Dialer bundle containing PPPoE session
Intf
Ethernet interface containing PPPoE session
State
State of PPPoE session